Hoodoo Hand (model #HH1L) -

LAVHH1 Mini Lavelier Microphone

• Element: Condenser
• Polar Pattern: Omni-Directional
• Sensitivity:-55 to +3 dB
• Output Impedance: 1.5KOhm +/- 30%
• SPL Max: 130dB
• Power Supply: 1.5V-10V DC
• Cable: 1.5mm X 1.2m
• Weight: 25g
• Mic Dimension: 6mm
• Fits into Patented “Hoodoo” Ring Clip 400mA

HHT100 Transmitter

• Audio Level maximum: 0 dBV ~ +20 dBV
• Gain Adjustment Range: 30 dB
• Input Impedance: 5 KOhm
• Power Requirement: two “AA” Alkaline Batteries
• Average Battery Life: >8 hours (Alkaline)
• Dimensions: 85 X 65 X 23mm 3.35” H X 2.6”W X .9”D

HH1R Receiver

• Audio Output Maximum (1 kHz):
  o XLR: 200 ohm
  o ¼” Kohm
• XLR Out:
  o Pin 1 – Ground
  o Pin 2 – (+)
  o Pin 3- (-)
• Sensitivity: <-92dB
• Power Requirement: 12-18VDC 400mA (included)
• Dimensions: 235 X 118 X 44mm 9.25” H X 4.65”W X 1.75”D

Hoodoo Box (#HHB5T) -

• Output Power: 5 Watts RMS @ 10% THD 8ohm load, 120VAC
• Internal Speaker: custom-designed Celestion™ “Super 8” 15 Watt handling, 8 ohm impedance
• Control Panel: ¼” Input, Gain, Tone, Volume, Reverb, Balanced XLR Direct Output, Power Switch, Power Indicator Lamp
• Reverb: Spring
• Gain: 58dB, tone setting at “10”, @ 1kHz
• Signal to Noise: 66dB
• Tone Control Range: +/- 16dB @ 1 kHz
• Input Type: ¼”
• Input Impedance: 1M ohm
• Maximum Input
  Signal Level: 2.5V peak to peak
• Tube Types: 1 Sovtek™ EL84 Power tube / 1 Sovtek™ 12AX7 (V1) preamp tube / 1 Sovtek™ 12AU7 (V2) preamp tube
• Line Out: XLR Balanced
• Power Requirements: 120VAC, 60Hz, 40VA 100/115VAC, 50/60Hz, 40VA 230 VAC, 50/60Hz, 40VA
• Power Supply: Switchable 115V/215V
• Size: 15.75” L X 13” W X 8” H/400 X 330 X 203mm
• Weight: 19.1 lbs./8.7 kg